dmesg - Latest Git - Unity 2D

Return To Latest Git - Unity 2D System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-999-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201206060421 SMP Wed Jun 6 08:28:57 UTC 2012
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003fecffff] usable
BIOS-e820: [mem 0x000000003fed0000-0x000000003fedefff] ACPI data
BIOS-e820: [mem 0x000000003fedf000-0x000000003fefffff] ACPI NVS
BIOS-e820: [mem 0x000000003ff00000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
DMI present.
DMI: LENOVO 2613EJU/2613EJU, BIOS 79ETE0WW (2.20 ) 12/07/2007
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3fed0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DBFFF uncachable
  DC000-DFFFF write-back
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 03FF00000 mask FFFF00000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1023MB, range: 1MB, type UC
total RAM covered: 1023M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 2M 	num_reg: 2  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1023MB, range: 1MB, type UC
found SMP MP-table at [mem 0x000f6810-0x000f681f] mapped at [c00f6810]
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x37bfdfff]
 [mem 0x00000000-0x001fffff] page 4k
 [mem 0x00200000-0x379fffff] page 2M
 [mem 0x37a00000-0x37bfdfff] page 4k
kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
RAMDISK: [mem 0x3646e000-0x3722efff]
ACPI: RSDP 000f67e0 00024 (v02 LENOVO)
ACPI: XSDT 3fed14d4 00084 (v01 LENOVO TP-79    00002200  LTP 00000000)
ACPI: FACP 3fed1600 000F4 (v03 LENOVO TP-79    00002200 LNVO 00000001)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20120320/tbfadt-548)
ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20120320/tbfadt-579)
ACPI: DSDT 3fed195e 0D433 (v01 LENOVO TP-79    00002200 MSFT 0100000E)
ACPI: FACS 3fef4000 00040
ACPI: SSDT 3fed17b4 001AA (v01 LENOVO TP-79    00002200 MSFT 0100000E)
ACPI: ECDT 3feded91 00052 (v01 LENOVO TP-79    00002200 LNVO 00000001)
ACPI: TCPA 3fedede3 00032 (v02 LENOVO TP-79    00002200 LNVO 00000001)
ACPI: APIC 3fedee15 00068 (v01 LENOVO TP-79    00002200 LNVO 00000001)
ACPI: MCFG 3fedee7d 0003C (v01 LENOVO TP-79    00002200 LNVO 00000001)
ACPI: HPET 3fedeeb9 00038 (v01 LENOVO TP-79    00002200 LNVO 00000001)
ACPI: BOOT 3fedefd8 00028 (v01 LENOVO TP-79    00002200  LTP 00000001)
ACPI: SSDT 3fef2655 0025F (v01 LENOVO TP-79    00002200 INTL 20050513)
ACPI: SSDT 3fef28b4 000A6 (v01 LENOVO TP-79    00002200 INTL 20050513)
ACPI: SSDT 3fef295a 004F7 (v01 LENOVO TP-79    00002200 INTL 20050513)
ACPI: SSDT 3fef2e51 001D8 (v01 LENOVO TP-79    00002200 INTL 20050513)
ACPI: Local APIC address 0xfee00000
130MB HIGHMEM available.
891MB LOWMEM available.
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
Zone ranges:
  DMA      [mem 0x00010000-0x00ffffff]
  Normal   [mem 0x01000000-0x37bfdfff]
  HighMem  [mem 0x37bfe000-0x3fecffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00010000-0x0009efff]
  node   0: [mem 0x00100000-0x3fecffff]
On node 0 totalpages: 261727
free_area_init_node: node 0, pgdat c18a3040, node_mem_map f73fd200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 222502 pages, LIFO batch:31
  HighMem zone: 262 pages used for memmap
  HighMem zone: 33228 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
e820: [mem 0x40000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f73da000 s34048 r0 d23296 u57344
pcpu-alloc: s34048 r0 d23296 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259681
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
__ex_table already sorted, skipping sort
Initializing CPU#0
allocated 2094592 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0003fed0)
Memory: 1011024k/1047360k available (5954k kernel code, 35884k reserved, 2942k data, 752k init, 133960k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc18b1000 - 0xc196d000   ( 752 kB)
      .data : 0xc15d09bd - 0xc18b0280   (2942 kB)
      .text : 0xc1000000 - 0xc15d09bd   (5954 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1828.852 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.70 BogoMIPS (lpj=7315408)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20120320
ftrace: allocating 26770 entries in 53 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
Performance Events: Core events, core PMU driver.
... version:                1
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
NMI watchdog: enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f5cb6000 soft=f5cc8000
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
Disabled fast string operations
TSC synchronization [CPU#0 -> CPU#1]:
Measured 521279 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7315.40 BogoMIPS).
devtmpfs: initialized
initlevel:0=early, 5 registered initcalls
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
initlevel:1=core, 33 registered initcalls
PM: Registering ACPI NVS region [mem 0x3fedf000-0x3fefffff] (135168 bytes)
dummy: 
RTC time: 16:35:25, date: 06/06/12
NET: Registered protocol family 16
initlevel:2=postcore, 16 registered initcalls
EISA bus registered
initlevel:3=arch, 17 registered initcalls
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
initlevel:4=subsys, 86 registered initcalls
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
ACPI: SSDT 3fef1d36 00240 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00240 (v01  PmRef  Cpu0Ist 00000100 INTL 20050513)
ACPI: SSDT 3fef1ffb 0065A (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 0065A (v01  PmRef  Cpu0Cst 00000100 INTL 20050513)
ACPI: SSDT 3fef1c6e 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 000C8 (v01  PmRef  Cpu1Ist 00000100 INTL 20050513)
ACPI: SSDT 3fef1f76 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT   (null) 00085 (v01  PmRef  Cpu1Cst 00000100 INTL 20050513)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 3 docks/bays found
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed40fff] (ignored)
PCI: root bus 00: using default resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xee400000-0xee403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io  0x1800-0x181f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io  0x1820-0x183f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io  0x1840-0x185f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io  0x1860-0x187f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xee404000-0xee4043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x1880-0x188f]
pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io  0x18c8-0x18cf]
pci 0000:00:1f.2: reg 14: [io  0x18ac-0x18af]
pci 0000:00:1f.2: reg 18: [io  0x18c0-0x18c7]
pci 0000:00:1f.2: reg 1c: [io  0x18a8-0x18ab]
pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
pci 0000:00:1f.2: reg 24: [mem 0xee404400-0xee4047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 20: [io  0x18e0-0x18ff]
pci 0000:01:00.0: [1002:7145] type 00 class 0x030000
pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
pci 0000:01:00.0: reg 14: [io  0x2000-0x20ff]
pci 0000:01:00.0: reg 18: [mem 0xee100000-0xee10ffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xee100000-0xee1fffff]
pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [8086:109a] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff]
pci 0000:02:00.0: reg 18: [io  0x3000-0x301f]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xee000000-0xee0fffff]
pci 0000:03:00.0: [8086:4227] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x5fff]
pci 0000:00:1c.1:   bridge window [mem 0xec000000-0xedffffff]
pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2:   bridge window [io  0x6000-0x7fff]
pci 0000:00:1c.2:   bridge window [mem 0xe8000000-0xe9ffffff]
pci 0000:00:1c.2:   bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
pci 0000:00:1c.3:   bridge window [io  0x8000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xea000000-0xebffffff]
pci 0000:00:1c.3:   bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
pci 0000:15:00.0: [104c:ac56] type 02 class 0x060700
pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xa000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xe4300000-0xe7ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fed0000-0x3fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
initlevel:5=fs, 31 registered initcalls
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
pnp 00:00: [mem 0x000dc000-0x000dffff]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0x3fffffff]
pnp 00:00: [mem 0xfec00000-0xfed3ffff]
pnp 00:00: [mem 0xfed41000-0xffffffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: [io  0x0000-0x0cf7 window]
pnp 00:01: [io  0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0x40000000-0xfebfffff window]
pnp 00:01: [mem 0xfed40000-0xfed40fff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0090-0x009f]
pnp 00:02: [io  0x0024-0x0025]
pnp 00:02: [io  0x0028-0x0029]
pnp 00:02: [io  0x002c-0x002d]
pnp 00:02: [io  0x0030-0x0031]
pnp 00:02: [io  0x0034-0x0035]
pnp 00:02: [io  0x0038-0x0039]
pnp 00:02: [io  0x003c-0x003d]
pnp 00:02: [io  0x00a4-0x00a5]
pnp 00:02: [io  0x00a8-0x00a9]
pnp 00:02: [io  0x00ac-0x00ad]
pnp 00:02: [io  0x00b0-0x00b5]
pnp 00:02: [io  0x00b8-0x00b9]
pnp 00:02: [io  0x00bc-0x00bd]
pnp 00:02: [io  0x0050-0x0053]
pnp 00:02: [io  0x0072-0x0077]
pnp 00:02: [io  0x164e-0x164f]
pnp 00:02: [io  0x002e-0x002f]
pnp 00:02: [io  0x1000-0x107f]
pnp 00:02: [io  0x1180-0x11bf]
pnp 00:02: [io  0x0800-0x080f]
pnp 00:02: [io  0x15e0-0x15ef]
pnp 00:02: [io  0x1600-0x165f]
pnp 00:02: [mem 0xf0000000-0xf3ffffff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed14000-0xfed17fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
system 00:02: [io  0x164e-0x164f] has been reserved
system 00:02: [io  0x1000-0x107f] has been reserved
system 00:02: [io  0x1180-0x11bf] has been reserved
system 00:02: [io  0x0800-0x080f] has been reserved
system 00:02: [io  0x15e0-0x15ef] has been reserved
system 00:02: [io  0x1600-0x165f] could not be reserved
system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x0000-0x000f]
pnp 00:04: [io  0x0080-0x008f]
pnp 00:04: [io  0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
pnp 00:0a: [mem 0xfed40000-0xfed40fff]
pnp 00:0a: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xee120000-0xee13ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:01.0:   bridge window [mem 0xee100000-0xee1fffff]
pci 0000:00:01.0:   bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.0:   bridge window [mem 0xee000000-0xee0fffff]
pci 0000:00:1c.0:   bridge window [mem 0x40000000-0x401fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x4000-0x5fff]
pci 0000:00:1c.1:   bridge window [mem 0xec000000-0xedffffff]
pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2:   bridge window [io  0x6000-0x7fff]
pci 0000:00:1c.2:   bridge window [mem 0xe8000000-0xe9ffffff]
pci 0000:00:1c.2:   bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
pci 0000:00:1c.3:   bridge window [io  0x8000-0x9fff]
pci 0000:00:1c.3:   bridge window [mem 0xea000000-0xebffffff]
pci 0000:00:1c.3:   bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:15:00.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:15:00.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
pci 0000:15:00.0: BAR 16: assigned [mem 0x44000000-0x47ffffff]
pci 0000:15:00.0: BAR 13: assigned [io  0xa000-0xa0ff]
pci 0000:15:00.0: BAR 14: assigned [io  0xa400-0xa4ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0:   bridge window [io  0xa000-0xa0ff]
pci 0000:15:00.0:   bridge window [io  0xa400-0xa4ff]
pci 0000:15:00.0:   bridge window [mem 0xe0000000-0xe3ffffff pref]
pci 0000:15:00.0:   bridge window [mem 0x44000000-0x47ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0:   bridge window [io  0xa000-0xdfff]
pci 0000:00:1e.0:   bridge window [mem 0xe4300000-0xe7ffffff]
pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xee100000-0xee1fffff]
pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x4000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x6000-0x7fff]
pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io  0x8000-0x9fff]
pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
pci_bus 0000:15: resource 0 [io  0xa000-0xdfff]
pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
pci_bus 0000:15: resource 4 [io  0x0000-0xffff]
pci_bus 0000:15: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:16: resource 0 [io  0xa000-0xa0ff]
pci_bus 0000:16: resource 1 [io  0xa400-0xa4ff]
pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
pci_bus 0000:16: resource 3 [mem 0x44000000-0x47ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.2: power state changed by ACPI to D0
pci 0000:00:1d.2: power state changed by ACPI to D0
pci 0000:00:1d.7: power state changed by ACPI to D0
pci 0000:00:1d.7: power state changed by ACPI to D0
pci 0000:01:00.0: Boot video device
PCI: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14084k freed
initlevel:6=device, 291 registered initcalls
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1339000525.624:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 1740
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 17aa ss_did 2011
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 17aa ss_did 2011
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 27d4 ss_vid 17aa ss_did 2011
pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 27d6 ss_vid 17aa ss_did 2011
pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 14
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (59 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (63 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 45
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ata6: port disabled--ignoring
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
initlevel:7=late, 50 registered initcalls
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type trusted registered
Key type encrypted registered
  Magic number: 0:177:590
rtc_cmos 00:07: setting system clock to 2012-06-06 16:35:26 UTC (1339000526)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4246N, 0X05, max UDMA/33
ata5.00: configured for UDMA/33
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-7: HTS541080G9SA00, MB4IC60H, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9SA00  MB4I PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 5-1: new full-speed USB device number 2 using uhci_hcd
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 4:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4246N 0X05 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 752k freed
Write protecting the kernel text: 5956k
Write protecting the kernel read-only data: 2444k
NX-protecting the kernel data: 4284k
udevd[103]: starting version 175
usb 5-2: new full-speed USB device number 3 using uhci_hcd
e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
e1000e 0000:02:00.0: Disabling ASPM L0s L1
e1000e 0000:02:00.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:16:41:56:ea:96
e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Adding 1046524k swap on /dev/sda5.  Priority:-1 extents:1 across:1046524k 
udevd[405]: starting version 175
type=1400 audit(1339000544.251:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=490 comm="apparmor_parser"
type=1400 audit(1339000544.251:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=490 comm="apparmor_parser"
type=1400 audit(1339000544.251:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=490 comm="apparmor_parser"
lp: driver loaded but no devices found
acpi device:06: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input4
ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
tpm_tis 00:0a: 1.2 TPM (device-id 0x3202, rev-id 5)
Non-volatile memory driver v1.3
intel_rng: FWH not detected
ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting iTCO_wdt
ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120320/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
cfg80211: Calling CRDA to update world regulatory domain
microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
cfg80211: World regulatory domain updated:
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: Microcode Update Driver: v2.00 , Peter Oruba
leds_ss4200: no LED devices found
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
[drm] Initialized drm 1.1.0 20060810
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
iwl3945: Copyright(c) 2003-2011 Intel Corporation
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000007
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io  0xa000-0xdfff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xdfff:
 excluding 0xa000-0xa0ff 0xa400-0xa4ff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff:
 excluding 0xe4300000-0xe46cffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff:
 excluding 0xe0000000-0xe3ffffff
iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:03:00.0: irq 47 for MSI/MSI-X
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: power state changed by ACPI to D0
radeon 0000:01:00.0: power state changed by ACPI to D0
[drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x17AA:0x2006).
[drm] register mmio base: 0xEE100000
[drm] register mmio size: 65536
ATOM BIOS: M64CSP/M62CSP/M54CSP/M52CSP
[drm] Generation 2 PCI interface, using max accessible memory
radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 445950 kiB
[TTM] Zone highmem: Available graphics memory: 512930 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: 1 quad pipes, 1 z pipes initialized.
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000008000000 and cpu addr 0xef71d000
[drm] Loading R500 Microcode
[drm] radeon: ring at 0x0000000008001000
[drm] ring test succeeded in 10 usecs
[drm] ib test succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA-1
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm]   LVDS-1
[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[drm]   Encoders:
[drm]     LCD1: INTERNAL_LVTM1
[drm] Connector 2:
[drm]   DVI-I-1
[drm]   HPD1
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
[drm] radeon: power management initialized
ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
 excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
 excluding 0x3f0-0x3f7 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
 clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
 clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
 excluding 0xc0000-0xd3fff 0xdc000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
 clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
 clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
 clean.
[drm] fb mappable at 0xD80C0000
[drm] vram apper at 0xD8000000
[drm] size 5914624
[drm] fb depth is 24
[drm]    pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: 
thinkpad_acpi: ThinkPad BIOS 79ETE0WW (2.20 ), EC 79HT50WW-1.07
thinkpad_acpi: Lenovo ThinkPad T60, model 2613EJU
thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
Console: switching to colour frame buffer device 175x65
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.15.0 20080528 for 0000:01:00.0 on minor 0
hda_intel: probe_mask set to 0x1 for device 17aa:2010
snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
init: failsafe main process (794) killed by TERM signal
ppdev: user-space parallel port driver
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1339000546.615:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=905 comm="apparmor_parser"
type=1400 audit(1339000546.615:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=905 comm="apparmor_parser"
type=1400 audit(1339000546.623:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=915 comm="apparmor_parser"
type=1400 audit(1339000546.635:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=914 comm="apparmor_parser"
type=1400 audit(1339000546.643:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=915 comm="apparmor_parser"
type=1400 audit(1339000546.643:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=915 comm="apparmor_parser"
type=1400 audit(1339000546.663:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=920 comm="apparmor_parser"
e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: plymouth-stop pre-start process (1193) terminated with status 1
cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0
show_signal_msg: 37 callbacks suppressed
gnome-settings-[1518]: segfault at 38 ip b22acf00 sp bf80544c error 4 in libmouse.so[b22ab000+9000]
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
wlan0: authenticate with 00:17:31:bb:0c:46
wlan0: send auth to 00:17:31:bb:0c:46 (try 1/3)
wlan0: authenticated
wlan0: associate with 00:17:31:bb:0c:46 (try 1/3)
wlan0: RX AssocResp from 00:17:31:bb:0c:46 (capab=0x431 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
CE: hpet increased min_delta_ns to 20113 nsec
hrtimer: interrupt took 8044637 ns
CE: hpet increased min_delta_ns to 30169 nsec
CE: hpet increased min_delta_ns to 45253 nsec
CE: hpet increased min_delta_ns to 67879 nsec
CE: hpet increased min_delta_ns to 101818 nsec
cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0
type=1400 audit(1339000853.010:24): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=916 comm="cupsd" pid=916 comm="cupsd" capability=36  capname="epollwakeup"
CE: hpet increased min_delta_ns to 152727 nsec
type=1400 audit(1339001696.798:25): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=916 comm="cupsd" pid=916 comm="cupsd" capability=36  capname="epollwakeup"
CE: hpet increased min_delta_ns to 229090 nsec
CE: hpet increased min_delta_ns to 343635 nsec

Return To Latest Git - Unity 2D System Information